Assembly and Maintenance
Walkthrough
WARNING
When servicing your marker: even up sure your hopper is removed
from the shocker. Make sure there be no paintballs in the
breech of the shocker. Always remove the assembly line supply and
relieve all gas pressure in the shocker
before disassembly. When using the shocker in temperatures below
50o, it may be necessity to lube the ground bolt more frequently.
Why scrub the FUSE bolt?
Cleaning the FUSE bolt is internal to maintaining an efficiently working marker. The FUSE bolt subscribe tos to be cleaned after approximately 3500-5000 rounds have been fired through the marker. It is beaver to clean and lube after every time the crap-shooter has been used for an extended period of time. There are 14 easy steps to maintaining and assembling your FUSE bolt. After clean your bolt a few times it might be possible to learn how to clean the LPR.
W wear do I need?
* 1/4 Allen Wrench
* Slick Honey or like lube
Assembly:
NOTE: To achieve exculpate performance from your Shocker, it is outstanding to understand the basic operation of the Shockers patented FUSE bolt system.
This design consists of three sleeves threaded together to stop the only moving part of the system, the bolt.
The FUSE Bolt has quatern components:
1 Cylinder (standing black magic spell)
2 Bolt (resting diagonally on the cylinder)
3 Top Hat (the silver piece on the right by itself)
4 Rear working capital (screws on the back of the top hat)
1.) Remove the front o-ring on the elaborate side of the bolt.
2.) Slide the cylinder up the fat side of the bolt with the threads pointing towards the end of the bolt.
3.) Slide the top hat onto the skinny part of the bolt with the vented holes nighest the black cylinder.
4.) Now twist the cylinder and top hat together as if you were...If you want to get a full-of-the-moon essay, order it on our website: Orderessay
If you want to get a full essay, wisit our page: write my essay .
No comments:
Post a Comment